AprilAire 2200 Filter and 2250 Filter (201): Real Size, Cost and the 1213/U1213 Upgrade Kits
Direct answer: The AprilAire 2200 filter is the 201, a MERV 10 pleated media pack that AprilAire also lists for the grille-mounted 2250. It is sold as 20 × 25 × 6 inches, but AprilAire lists its actual size as 21.06 × 25.19 × 7.38 inches. A 2200, not a 2250, can be converted to newer rail-mounted filters with an upgrade kit.

The AprilAire 2200 filter question comes up because the 2200 is an older cabinet: it takes a 6-inch, accordion-style media pack (the 201) held open by plastic pleat spacers, not the slide-in 4-inch filters newer AprilAire cabinets use. Everything below comes from AprilAire's own store pages and AprilAire instructions, read on November 20, 2026, plus one retailer listing for a kit AprilAire no longer shows. If you are not sure which cabinet you have, start with our AprilAire filter by model guide.
AprilAire 2200 filter options AprilAire lists
| Option | Fits (as listed) | MERV | Nominal (H×W×D, in) | Actual (H×W×D, in) | Listed schedule | Price |
|---|---|---|---|---|---|---|
| 201 filter (the standard media) | 2200, 2250 | 10 | 20 × 25 × 6 | 21.06 × 25.19 × 7.38 | 12–24 months | $43.99 (1-pack, AprilAire) |
| U1213 kit (3-inch TriPure filter + rails) | 2120, 2200 | 13 | 20 × 25 × 5 | 21.07 × 25.24 × 5.19 | filter "lasts up to 12 months" | $64.99 (AprilAire) |
| 1213 kit (213 filter + frame) | 2200 after 1985, 2120 (per AprilAire pages) | 13 (213 filter) | not listed on a live AprilAire page | not listed on a live AprilAire page | 213: 12 months | $128.26 (retailer: Air Quality Parts) |
The 201 is the filter for both the 2200 and the 2250
AprilAire's 201 page names exactly two compatible models, the 2200 and the 2250, and lists the 201 as MERV 10 bonded glass fiber (source 1). The 2250 is the grille-mounted version: AprilAire's 201 media instructions cover "Models 2200 & 2250" and differ only in how you get to the media. On a 2200 you remove the access door and slide out the inner assembly; on a 2250 you loosen two knobs on the grille and pull the grille assembly out (source 7). The media pack itself is the same 201.
What the 201 costs and how often AprilAire says to change it
On AprilAire's store the 201 was listed at $43.99 for one, $79.99 for a 2-pack, $156.99 for a 4-pack (shown as unavailable when we checked) and $377.99 for a 10-pack (source 1). By our arithmetic that is about $40.00 per filter in the 2-pack and $37.80 in the 10-pack.
AprilAire lists a 12–24 month replacement schedule. The page explains that the 201 is a surface-loading filter whose efficiency increases with use, that it "can last up to 2 years," and that if you run your HVAC fan all day, every day, you should replace it after 12 months (source 1). So a year of 201 filters costs $43.99 at the single price if you change it yearly, or less per year on the 2-year schedule.
Two parts that people often need with an old 2200 are also on AprilAire's store:
- 4119 pleat spacers (5-pack), $69.00: listed for the 2200, 2250 and 2600; AprilAire says the package includes all 5 spacers the compatible models need (source 8). You reuse your existing spacers with each new 201, so you only need these if yours are broken or missing.
- 4725 seal kit, $36.75: listed for the 2200 only; it includes two inner housing seals, an outer housing seal, a door seal and a door liner (source 9).
Upgrade kit 1213 vs U1213: moving a 2200 off the 201
AprilAire's 213 and 210 filter pages still list "2120 with Upgrade Kit 1213" and "2200 with Upgrade Kit 1213" among their compatible models (sources 3, 4). AprilAire's 1213/1413 installation instructions say the kit contains one filter media, two frame bases, four frame supports, a Styrofoam door liner and a door label, replaces the inner housing assembly, and "fits all Model 2400 air cleaners and Model 2200 air cleaners produced after 1985" (source 5). Once a 1213 is in, the cabinet takes the 4-inch 213 (MERV 13) or 210 (MERV 11), both listed at 20 × 25 × 4 nominal and 20.6 × 26.63 × 4 actual with a 12-month schedule (sources 3, 4); our 213 vs 413 vs 210 vs 410 comparison covers those filters in detail.
When we checked, AprilAire's store no longer had a 1213 page and instead sold the U1213 for $64.99. AprilAire describes it as a 3-inch MERV 13 TriPure filter plus "free, one-time upgrade rails" that "replaces the AprilAire 201 Filter and inner housing," for the 2120 and 2200. The box lists one 3F213 filter media, four frame supports, two frame bases, a Styrofoam door liner, a door label and instructions; the warranty is 5 years on the upgrade rails only (source 2). The 201's own page now points owners to the U1213 (source 1).
What we could not confirm: AprilAire's UK213 and UK211 pages carry the same footnote, telling owners of an unconverted 6-inch cabinet to choose the U1213, and owners of a cabinet already converted with a 1213 kit to choose the UK211 (sources 10, 11). Both UK pages list the 2200 as compatible. Which TriPure refill AprilAire intends after the first U1213 filter is not stated on the pages we read, so confirm with AprilAire before reordering. The 2210 version of this swap is explained in our AprilAire 2210 replacement filter guide.
201 or upgrade kit: the cost picture
Using AprilAire's listed prices on November 20, 2026: staying on the 201 costs $43.99 per filter on a 12–24 month schedule (source 1). The U1213 costs $64.99 the first time, including the rails and the first MERV 13 filter, which AprilAire says lasts up to 12 months (source 2). A cabinet already converted with the older 1213 kit uses a $64.99 213 or $60.99 210 each year (sources 3, 4). EPA advises choosing the highest MERV "your system fan and filter slot can accommodate" and asking an HVAC technician if unsure (source 12); we make no claim about what any grade does for health.
How AprilAire says to replace the 201 media
- Turn off the furnace blower. On a 2200, remove the access door and slide out the inner assembly. On a 2250, loosen the two grille knobs, pull the grille assembly out until the spring clips engage, then compress the clips and remove it.
- Identify your inner housing style. AprilAire's instructions split into housings with a center aluminum brace and black holding brackets, and housings with hinged brackets and no center brace.
- Remove the old media. With the pleat spacers facing up, unsnap the side latches and open both end panels, lift out the pleat spacers, remove or open the brackets, lift the far cardboard flap clear, compress the media and lift it out.
- Install the new 201. Place one cardboard flap on the far side, expand the media toward you, place the other flap on the near side and center the media over the opening. Refit the brackets.
- Refit the pleat spacers. Place one spacer finger in each pleat, starting next to the alignment yarn, and snap the spacer ends into the bracket notches. Close the end panels and latches.
- Reinstall. Slide the inner assembly back in and replace the door (2200), or slide the grille assembly in, let the clips catch and tighten the two knobs (2250). Turn the blower back on.
Third-party sellers such as Filterbuy (affiliate link) sell custom-size filters, but we have not seen an AprilAire statement that any non-AprilAire media fits the 2200 or 2250, so any such fit is unconfirmed. More cabinet lookups are in the air filters hub.
If the cabinet or furnace needs replacing
The 1213/1413 instructions only cover 2200 cabinets produced after 1985, and AprilAire's U1213 page calls the kit a "fraction of the cost of a new unit" (sources 2, 5). If your 2200 is damaged, or the furnace it sits on is near the end of its life, quote services such as Modernize HVAC quotes (affiliate link) connect homeowners in Chicago and elsewhere with local contractors. Get more than one quote and ask the contractor to confirm the cabinet model and filter in writing. We do not vouch for any contractor; see our affiliate disclosure.
Sources
- AprilAire 201 MERV 10 Air Filter, AprilAire Store: shop.aprilaire.com/products/aprilaire-201-replacement-filter (checked November 20, 2026)
- AprilAire U1213 MERV 13 TriPure Filter + Upgrade Rails for AprilAire/Space-Gard 2120, 2200, AprilAire Store: shop.aprilaire.com/products/aprilaire-u1213-upgrade-kit (checked November 20, 2026)
- AprilAire 213 MERV 13 Air Filter, AprilAire Store: shop.aprilaire.com/products/aprilaire-213-replacement-filter (checked November 20, 2026)
- AprilAire 210 MERV 11 Air Filter, AprilAire Store: shop.aprilaire.com/products/aprilaire-210-replacement-filter (checked November 20, 2026)
- Research Products Corporation (AprilAire), "Models 1213 & 1413 Upgrade Kit for Media Air Cleaners Installation Instructions" (PDF hosted by Sid Harvey): sidharvey.com/documents/1213AA_Install.pdf (checked November 20, 2026)
- AprilAire 1213 Upgrade Kit & Filter, Air Quality Parts (retailer): airqualityparts.com/aprilaire-1213-upgrade-kit-filter.html (checked November 20, 2026)
- AprilAire, "Media Replacement Instructions for Air Cleaner Models 2200 & 2250, Model 201 Media Installation" (PDF hosted by US Supply): ussupply.com/media/product_pdfs/201_User_Guide.pdf (checked November 20, 2026)
- AprilAire 4119 Pleat Spacer (5-Pack), AprilAire Store: shop.aprilaire.com/products/aprilaire-pleat-spacer-4119-for-model-2200 (checked November 20, 2026)
- AprilAire 4725 Seal Kit, AprilAire Store: shop.aprilaire.com/products/aprilaire-universal-seal-kit-4725-for-model-2200 (checked November 20, 2026)
- AprilAire UK213 (Replaces 213) MERV 13 TriPure Filter + Upgrade Rails, AprilAire Store: shop.aprilaire.com/products/aprilaire-uk213-upgrade-kit (checked November 20, 2026)
- AprilAire UK211 (Replaces 210) MERV 11 TriPure Filter + Upgrade Rails, AprilAire Store: shop.aprilaire.com/products/aprilaire-uk211-upgrade-kit (checked November 20, 2026)
- US EPA, "What is a MERV rating?": epa.gov/indoor-air-quality-iaq/what-merv-rating (checked November 20, 2026)
Frequently asked questions
What size filter does an AprilAire 2200 take?
The 2200 takes the AprilAire 201. AprilAire lists it as 20 × 25 × 6 inches nominal and 21.06 × 25.19 × 7.38 inches actual (checked November 20, 2026).
Does the AprilAire 201 fit the 2250?
Yes. AprilAire's 201 page lists the 2200 and 2250 as its compatible models, and AprilAire's 201 media instructions cover both models.
Can I put a 213 filter in an AprilAire 2200?
Only after an upgrade kit. AprilAire's 213 and 210 pages list "2200 with Upgrade Kit 1213". AprilAire's store now sells the U1213 kit, which it says replaces the 201 filter and inner housing in the 2120 and 2200. The 2250 is not listed for either kit.
How often should the AprilAire 201 be replaced?
AprilAire lists a 12 to 24 month schedule for the 201 and says to replace it after 12 months if the HVAC fan runs all day, every day.
More on this topic: Whole-House Air Filters · All Filterwise guides · How we research · Affiliate disclosure